|
发表于 2024-2-19 11:21:55
|
显示全部楼层
解决IBM T43/R52更换硬盘错误的方法是什么?
IBM T43的硬盘太小了,我想升级到120G的,但是却发现升级硬盘以后开机的时候报2010的错误:
ERROR
2010arning:your internal hard disk drive(HDD) may not fuction correctly on this system.Ensure that your HDD is supported on this system and that the latest HDD firmware is installed
Press<ESC> to continue
Press <F1>to setup
查看了官方的说明才知道,T43和R52系列都有同样的问题,只要升级BIOS就可以解决,具体的T43要升级到1.24,R52要升级到1.22,X41要升级到2.05,详细说明文章最下方有介绍。而我T43的BIOS版本是1.22(1YET57WW)。以下英文是官方对升级的版本说明:
A new option to allow the system to boot without pressing the Esc key in the BIOS Setup when the 2010 error (An unsupported hard disk is used or the firmware of IBM/Lenovo hard disk is old) is displayed.
升级BIOS程序到最新版本,之后在BIOS中进行设置,即可不按Esc键直接启动系统,具体选项为:
以下英文是官方操作方式:
To change the setting, go to 'BIOS Setup menu', 'Startup' and then 'Boot after message for HDD...'.
(Note) Use the supported hard disk or update the firmware of IBM/Lenovo hard disk for safe.
中文版本具体操作方式:
'BIOS Setup menu'->'Startup'->'Boot after message for HDD compatibility without having to press |,将这个选项设为“Continue”(默认是“Pause”)。
支持修改的BIOS版本详细说明:
AJCDN公司总部位于美国,租售云服务器,高防服务器,是海内外企业拓展市场的好助手,国内海外节点,大带宽,安全免实名,一手货源,自主管理,3天无理由退款,支持款项退USDT,在香港新加坡台湾日本欧洲均有机房直营,全年24小时客服,使用满意再合作,联系飞机telegram @sala135 |
|